Hardwired vs. Plug-In EV Chargers: Which Is Better for Your Home?

By Electric FX Inc. · Licensed Electrical Contractor

When planning an electric vehicle charger installation in Toronto or the GTA, one of the first decisions is whether to choose a hardwired charger or a plug-in model.

Both can provide convenient Level 2 home charging when the equipment and installation are suitable. The better choice depends on your electrical system, desired charging rate, installation location and whether you expect to take the charger with you when you move.

How the two installation methods differ

A hardwired charger connects directly to the electrical wiring supplying it. There is no wall plug and receptacle between the charger and its supply.

A plug-in charger connects to a compatible receptacle installed for the equipment. Common configurations include NEMA 14-50 and NEMA 6-50, but the correct arrangement must be confirmed for the particular charger.

“Plug-in” describes the connection method. It does not mean an existing outlet is automatically suitable for charging an electric vehicle.

Why choose a hardwired EV charger?

Hardwiring is worth considering for a permanent charging location. It removes the plug-and-receptacle connection and can provide a tidy installation with the wiring routed directly into the equipment.

It may also be necessary for the charging output you want. For example, ChargePoint’s Canadian Home Flex guidance limits its supported plug-in arrangement to a 50-amp circuit with up to 40 amps of charging. Its 48-amp and 50-amp charging settings require hardwired installation with the appropriately designed supply. These are product-specific requirements, not specifications that apply to every charger. 1

Hardwiring does not automatically make charging faster. If two installations deliver the same charging power to the same vehicle, their connection method alone does not create a speed advantage.

When a plug-in charger makes sense

A plug-in model may appeal to homeowners who want the option of removing their charger when they move. The equipment must still be suitable for the electrical supply at the next property.

It may also be practical where a compatible circuit and receptacle already exist and an electrician confirms their suitability. That assessment should consider the wiring, circuit protection, receptacle condition and manufacturer’s instructions.

The presence of a large outlet in the garage is not enough. A receptacle originally installed for different equipment may need changes before it can supply an EV charger.

Consider the installation location

For a garage installation, think about parking position, cable reach and how the connector will be stored. Avoid a layout that requires stretching the cable or running it across a walking route.

For outdoor charging, the complete installation must suit the location. Check the charger’s outdoor rating and operating-temperature range, along with the required protection for any receptacle and connection.

Neither installation method makes unsuitable equipment weatherproof. Follow the requirements for the exact product and account for snow clearing, drainage and possible vehicle impact.

Compare the complete cost

A plug-in installation is not automatically cheaper. If a new circuit is required, the quote must account for the wiring, receptacle, enclosure and applicable protection. A hardwired installation has its own equipment and labour requirements.

Ask for a comparison based on the same charging output and mounting location. This makes it easier to see what you are paying for rather than comparing two proposals with different capabilities.

Both options also require an assessment of the home’s electrical capacity. Selecting a plug-in model does not avoid a service-capacity issue.

Make the decision before buying

Have a Licensed Electrical Contractor review the proposed charger and installation before you order. In Ontario, the equipment must carry a recognized Canadian approval mark, and the installation requires the applicable ESA notification and review process. 2

For a permanent home installation, hardwiring is a useful option to discuss first. A plug-in charger remains a practical choice where its flexibility is valuable and the complete installation meets the equipment and electrical requirements.

Electric FX helps homeowners in Toronto and the GTA compare both approaches and plan charging around their vehicle and property.

Contact Electric FX with your vehicle details, preferred charger and proposed installation location to request an assessment and estimate.

Related EV charging guides

How to choose an electric vehicle charger · EV charging on a 100-amp service · EV charger installation costs

Sources

1. ChargePoint Canada — Home Flex installation FAQ

2. Electrical Safety Authority — Electric vehicles and charging systems

Planning an electrical project?

Tell us about your home, renovation or upgrade. Electric FX serves Toronto, the GTA and Simcoe County, with projects also available in Muskoka.