LED strip & millwork lighting · Toronto & GTA

LED strip & millwork lighting.
Toronto & GTA.

Electric FX installs LED strip lighting for kitchens, custom cabinetry, shelving and architectural details across Toronto, the GTA and Simcoe County. We coordinate the electrical system with your millwork so the lighting feels part of the design.

Our experienced team of qualified, licensed electricians works with homeowners, designers, builders and cabinetmakers to plan wiring, drivers, channels and controls before finishes are complete.

Request a millwork lighting quoteCall 437-292-4970
Licensed Electrical Contractor · ECRA/ESA 7012216 · Master Electrician led · Custom Lighting Details
Bring the design to life

Lighting for work surfaces and special details.

Under-cabinet lighting

Plan illumination for kitchen counters, coffee stations and work areas, with placement considered alongside the backsplash and cabinetry.

Shelves & display cabinets

Highlight bookshelves, glass cabinets and display niches while coordinating cable routes through the millwork.

Toe-kicks & floating vanities

Add a subtle lower-level lighting detail where the selected equipment and location are suitable.

Coves & ceiling details

Plan concealed accent light within a ceiling recess or architectural feature, with the mounting detail coordinated before construction.

Closets & wardrobes

Discuss interior lighting and compatible door or occupancy controls as part of the cabinetry plan.

Feature walls & built-ins

Coordinate linear lighting with media units, wall panels and custom joinery to emphasize the intended surfaces.

Plan the complete system

More than a strip of LEDs.

We select the LED tape, mounting channel, diffuser, driver and controls as a compatible system. Light output, colour temperature and colour rendering should suit the finishes and purpose of the space.

Channels & diffusers

Surface-mounted, angled or recessed profiles can help integrate the lighting with the cabinetry. Channel depth, lens and LED selection affect the finished appearance.

Drivers & power feeds

We plan the supply, driver capacity, cable routes and feed locations around the selected product’s requirements and permitted run lengths.

Access for servicing

Driver and connection locations are considered early so the system can be serviced without unnecessary disruption to finished millwork.

If you want a continuous-looking line of light, we review suitable tape and channel combinations. A diffuser alone does not guarantee that individual LED points will disappear, especially in shallow profiles or reflective surfaces.

Controls & colour

Useful by day. Atmospheric by evening.

Dimming & separate zones

Control task and accent lighting independently where the scope allows. We match the driver and dimmer rather than assuming any dimmable components will work together.

Lutron integration

Discuss compatible Caséta or RadioRA 3 controls to include millwork lighting in scenes and schedules alongside the room’s other lights.

Tunable white & colour

Suitable systems can offer adjustable white light or colour effects. These require the appropriate tape, driver and controller selected together.

We help compare warm white, more neutral white and specialty options against your materials. We also discuss whether the priority is countertop visibility, a gentle accent or a flexible combination.

Learn more about our Lutron lighting controls and lighting design and installation.

Coordinate before fabrication

The best details start with a shared plan.

1. Review the drawings

Share millwork elevations, dimensions, finishes and lighting goals. We coordinate the proposed channel sizes, cable entry points and driver locations with your cabinetmaker.

2. Rough in & install

We complete the agreed electrical work and lighting installation in coordination with the millwork schedule, following applicable Ontario requirements and manufacturer instructions.

3. Check & configure

We check the completed lighting, configure the agreed controls and explain operation and access for future servicing.

The quote identifies the electrical scope, lighting components and installation responsibilities. Routing channels, modifying cabinetry, decorative finishes and restoration are clarified with the appropriate trade before work begins.

Planning a renovation or custom home? Include millwork lighting before cabinets are manufactured and walls are closed.

Common questions

LED strips and millwork lighting, explained.

Can you add lighting to existing cabinets?

Often, yes. We assess cable access, mounting space and possible driver locations. The appearance and extent of concealed wiring depend on the existing construction.

Can the channels be recessed into the woodwork?

Yes, where the design and material allow. We provide the selected profile requirements so your cabinetmaker can coordinate the recess and cable entries before fabrication.

Can I have a smooth line of light without visible dots?

We can assess suitable high-density or COB tape and diffuser combinations. The result depends on the complete assembly, viewing angle and surrounding surfaces; a sample can help confirm a critical detail.

Can all the lighting use one driver?

That depends on the load, voltage, permitted run lengths, cable routes and control zones. We design the arrangement around the selected equipment rather than driver wattage alone.

Can the LED strips be dimmed with my existing switch?

Only with a compatible dimming arrangement. We review the existing control, LED driver and tape before confirming whether they can be retained.

Can you light a shower niche or an outdoor feature?

Only with a system approved for the specific conditions and installed accordingly. We coordinate location ratings, connections, electrical protection and waterproofing responsibilities before confirming the design.

Can you replace old under-cabinet lights?

Yes. We assess existing wiring and controls, then propose suitable replacement lighting. Old drivers or transformers may need replacement as part of the upgrade.

Why is part of my LED strip dim, flickering or a different colour?

The cause may involve the tape, connections, power supply, controls or installation arrangement. We investigate the system before recommending repairs or replacement.

How much does millwork lighting cost?

Pricing depends on the lengths, profiles, drivers, control zones and installation access. Send drawings or photos so we can prepare a project-specific scope and quote.

Product resources: Liteline: architectural channels · Liteline: millwork and under-cabinet lighting. Features and compatibility are confirmed for the selected system.
Plan the finishing details

Let’s light your millwork beautifully.

Electric FX serves Toronto, the GTA and Simcoe County. Share your drawings, inspiration and preferred controls to get started.

Request your lighting quote