Residential & Commercial EV Charging

EV charger installation.Toronto, the GTA, and Simcoe County.

Electric FX provides Level 2 EV charger installation in Toronto, the GTA, and Simcoe County, including energy-management solutions and electrical panel upgrades when needed.

Licensed Electrical ContractorLevel 2 ChargingEV Energy ManagementESA Permit Coordination
Charging planned properly

The charger is only one part of the installation.

Considering solar panels or home battery storage alongside EV charging? Discuss the combined equipment and energy needs during planning so the installation can be assessed as one system.

A dependable EV charging installation begins with the electrical service, available capacity, charging requirements and the location of the vehicle. Electric FX reviews the full system before recommending the circuit, charging equipment or energy-management approach.

Whether you are adding one charger at home or planning charging for a commercial property, we provide a clean installation designed around safety, daily convenience and future needs.

Where we install

Charging solutions for homes and businesses.

Every installation is tailored to the property, electrical service, parking arrangement and vehicle requirements.

Residential

Home EV charging

Convenient overnight charging for garages, driveways, laneway homes and custom residences.

  • Hardwired or receptacle-based Level 2 charging
  • Indoor and outdoor installations
  • EV energy-management systems
  • Panel and service-capacity assessment
Commercial

Workplace & property charging

Practical charging infrastructure for offices, mixed-use properties, fleets and customer parking.

  • Single or multiple charging stations
  • Load planning and electrical distribution
  • Equipment-location coordination
  • Future-capacity and expansion planning
Capacity before compromise

EV charger load management.
Make the most of your existing service.

An existing 100A service does not automatically rule out Level 2 charging. When a homeowner does not want—or the property cannot practically accommodate—a 200A service upgrade, an approved EV energy-management system may provide a safe alternative. Suitability is confirmed through a load calculation, charger requirements and site assessment.

01 · DEDICATED CIRCUIT

Direct charging circuit

A properly sized circuit selected for the charging equipment, installation method and manufacturer requirements.

02 · EVEMS

Energy management

An approved EVEMS monitors the home’s electrical demand and automatically reduces or pauses EV charging when other loads need the available capacity. Charging resumes when capacity becomes available, helping suitable 100A homes add Level 2 charging without upgrading to a 200A service.

03 · SERVICE UPGRADE

More capacity

When the load and future plans require it, we can coordinate panel and service upgrades as part of the charging project.

Complete electrical scope

From load assessment to final charging test.

Assessment

Service & load review

We review the panel, service size, major electrical loads, route and charger specifications before installation.

Planning

Charger location

The cable route and equipment location are coordinated for everyday access, clean appearance and weather exposure.

Installation

Dedicated wiring

Breaker, wiring, disconnecting means when required, equipment connection, grounding and bonding completed as one scope.

Capacity

EVEMS integration

Energy-management equipment is selected and installed when it is the right way to manage charging within service capacity.

Upgrades

Panels & services

Panel replacement, subpanel work or service upgrades can be coordinated when the existing system cannot support the plan.

Completion

Testing & handover

We test the installation, confirm operation and explain the electrical setup before completing the project.

Designed around real use

The right charging speed without unnecessary electrical work.

We help balance how quickly the vehicle needs to charge with the capacity of the home or business. That may mean a dedicated charging circuit, managed charging, or a larger electrical service upgrade or panel replacement that supports future equipment as well.

Level 2Everyday home and workplace charging
100AEVEMS may avoid a 200A upgrade when suitable
EVEMSLoad-management options when suitable
ESAPermit and inspection coordination
Tesla & local installation

Tesla Wall Connector installation.
Planned around your home.

Electric FX installs suitable Tesla Wall Connectors and other Level 2 chargers. Send the exact charger model and vehicle details so we can confirm compatibility, the wiring route, available capacity and the installation scope.

Toronto & the GTA

EV charger installation in Toronto and the GTA

Plan home charging for your garage or driveway with a review of the panel, parking position and cable route. Tell us about detached parking, finished walls or a future second vehicle so the quote reflects the work needed.

Explore our Toronto electrical services

Simcoe County

EV charger installation in Simcoe County

We serve homes and businesses across Simcoe County. Share your property location, charger model and panel photos to discuss a dedicated circuit, suitable load management or any required service work.

Explore our electrical service areas

For a Tesla Wall Connector, we review the selected model and manufacturer requirements for circuit settings, commissioning and customer setup. Dynamic power management requires compatible additional equipment; suitability is assessed for your installation. See Tesla’s installation guidance and power-management information.

Before choosing your charger

Plan your home EV charging installation.

We serve Toronto, the GTA and Simcoe County, including Barrie and Innisfil. Share your address, vehicle and charger model, and photos of the parking and panel areas so we can confirm the next step.

A clear installation process

Every major detail decided before the wiring begins.

01 · REVIEW

Assess

We review the service, panel, loads, vehicle, charger and parking location.

02 · DESIGN

Plan

We determine the circuit, route, equipment and capacity strategy.

03 · INSTALL

Complete

Our team installs, connects, tests and coordinates the electrical work.

04 · SUPPORT

Adapt

We remain available for charger changes, added vehicles and future electrical upgrades.

Common questions

What to know before installing an EV charger.

Browse all electrical FAQs →

Are EV charger rebates included in the installation price?

No incentive is assumed in our quoted price. Eligibility depends on the current program, property and equipment. Check the administering program’s rules and any pre-approval requirements before buying or booking. Share the requirements with us so the electrical scope can be reviewed; a quote does not guarantee rebate approval.

How much does EV charger installation cost in Toronto, the GTA, and Simcoe County?

Our installation planning range is $750–$1,500+ CAD, plus HST. Charger supply, load management and service upgrades are quoted separately. Read our EV charger installation cost guide for the factors that affect your quote.

Installation pricing depends on the distance from the electrical panel to the parking space, the cable route, access through finished walls, the charger selected and the available electrical capacity. Outdoor routing, trenching or an approved energy-management system can add to the scope. We assess these details before quoting so the price reflects your property and charging needs.

What is included in an EV charger installation quote?

Your written scope identifies the charger supply, if included, the dedicated circuit and wiring route, mounting, electrical connections, testing and applicable ESA notification and inspection arrangements. It also identifies any energy-management equipment or panel work. Tell us if you already own a charger so we can check its specifications and clearly separate equipment supply from installation.

How long does an EV charger installation take?

The schedule depends on the wiring route, site access, equipment availability and whether panel work or trenching is needed. A straightforward installation and a detached-garage installation can require very different amounts of work. We confirm the planned installation time after assessment and explain any separate inspection or utility coordination.

Do I need the highest-output home charger?

Not necessarily. We consider your daily driving, how long the vehicle is normally parked, the vehicle’s AC charging capability and the home’s available electrical capacity. A lower charging setting may meet your overnight needs. We compare suitable charging and energy-management options before recommending a service upgrade.

Can I install a Tesla Wall Connector on a 100 amp service?

It may be possible after a load assessment. We compare an appropriate charging setting, a compatible approved load-management solution and any required service upgrade. A lower charging rate may meet your daily driving needs. Charger generation, equipment compatibility and the existing electrical system determine the options. Read our EV charging on a 100A service guide.

What should I send for an EV charging estimate?

Send your project address, vehicle and charger model if selected, photos of the outside of the electrical panel, and photos showing the route to your usual parking space. Tell us whether the garage is attached or detached and whether you expect to charge a second vehicle later. Leave all electrical covers in place; we assess internal equipment during the site review.

Can I install Level 2 charging with a 100A service?

Often, but not automatically. We complete a load assessment and consider charging needs, existing loads and whether energy management is appropriate.

Does every EV charger require the same circuit?

No. Circuit size and wiring depend on the charger’s continuous output, manufacturer requirements and the approved installation design.

What is an EV energy-management system?

An EVEMS monitors the total demand on the electrical service and controls the charger so the service is not overloaded. For a suitable 100A home, it may allow Level 2 charging without upgrading the main service to 200A. The final solution depends on the load calculation, charger, equipment certification and installation conditions.

Can the charger be installed outdoors?

Yes, when the charging equipment and installation are suitable for the location, weather exposure and cable-management requirements.

Do you install customer-supplied chargers?

We can install suitable customer-supplied equipment after reviewing its certification, specifications, compatibility and condition.

Ready when you park

Plan charging that works for your vehicle and your property.

Send us your charger model, vehicle details, panel photos and preferred parking location. We will help define the right electrical scope and next steps.