Pot light & downlight installation.
Toronto & GTA.
Electric FX installs LED pot lights and downlights for homes, renovations and commercial spaces across Toronto, the GTA and Simcoe County. We help plan fixture style, placement and controls around the way you use each room.
Our experienced team of qualified, licensed electricians works with homeowners, builders and designers to bring skilled workmanship and clear communication to projects of every size.
Request a downlight quoteCall 437-292-4970The right downlight for the space.
Regressed downlights
A recessed light source offers a more discreet appearance and can help manage glare when the optics and placement suit the room. A strong option to consider for living areas and refined interiors.
Adjustable gimbal lights
Direct light toward artwork, a feature wall or a specific area. We consider adjustment range, beam angle and ceiling conditions when selecting the fixture.
Slim LED fixtures
Low-profile options can be useful where ceiling space is limited. We still confirm room for the complete fixture and driver, along with the required installation ratings.
Options may include Liteline LUNA regressed gimbal fixtures and other suitable products. Fixture size, trim finish and performance are selected for the project rather than using one style throughout every room.
Put light where it does the most good.
We consider furniture, cabinetry, ceiling height, work surfaces and focal points before finalizing the layout. A consistent ceiling pattern should also work with the room below it.
Kitchens & work areas
Coordinate downlights with counters, cabinetry and task lighting so the proposed layout supports everyday work.
Living rooms & bedrooms
Plan comfortable general light, accent areas and separate zones for different activities and evening settings.
Bathrooms & exterior soffits
Select fixtures approved for the specific location and exposure, with the layout coordinated around moisture, architecture and access.
Beam spread, light output, colour temperature and colour rendering all affect the result. We discuss these choices with you, along with existing pendants, sconces and other light sources.
Explore our broader lighting design and installation services for a coordinated approach.
Make the room work from morning to evening.
We match dimmable fixtures and drivers with suitable controls, checking manufacturer compatibility information and the load on each circuit. A dimmable label alone does not guarantee compatibility with every dimmer.
Wall dimmers
Use compatible controls to adjust brightness for the room. We review dimming operation and available settings at completion.
Separate lighting zones
Control general and accent lighting independently where the wiring and scope allow, rather than putting every fixture on one switch.
Smart lighting & scenes
Discuss compatible Lutron Caséta or RadioRA 3 controls for scenes, schedules and convenient operation as part of the project.
Warm-dim or colour-selectable fixtures may be available where suitable. We explain the difference between setting a fixture’s colour temperature and changing it through a control system.
Learn more about our Lutron lighting control services.
A clear plan before the first ceiling cut.
1. Review & select
Share drawings, room photos and lighting goals. We review ceiling access, existing wiring and the proposed fixture locations before confirming the scope.
2. Install & connect
We complete the agreed electrical work under applicable Ontario requirements and manufacturer instructions, including required ESA coordination.
3. Aim & adjust
We check operation, aim adjustable fixtures and configure the agreed controls, then walk you through the finished lighting.
Insulation contact, air sealing, location ratings and any fire-rated ceiling assembly must be considered for the selected installation. We confirm suitability rather than assuming all recessed fixtures can be installed the same way.
Finished ceilings can conceal framing, wiring and other services. Additional access openings may be needed, and we clarify responsibility for patching and painting in the estimate.
For coordinated rough-in, explore our renovation and custom-home electrical services.
Pot lights and downlights, explained.
How many pot lights does my room need?
It depends on the room, ceiling height, fixture output, beam spread and other light sources. We plan the layout around those factors rather than applying one spacing rule to every project.
Are regressed lights better than slim lights?
Each has a place. Regressed optics can suit projects prioritizing visual comfort and a discreet light source; slim fixtures can help where depth is restricted. We compare the actual products and room conditions.
Can you replace existing halogen pot lights with LED?
Yes. We assess the existing housings, openings, wiring and controls before recommending a compatible retrofit or complete fixture replacement.
Can you install lights in a finished ceiling?
Often, but access and concealed construction determine the approach. We discuss likely openings and restoration before confirming the work.
Which colour temperature should I choose?
We help compare warmer and more neutral light against the room’s finishes, intended use and existing fixtures. Consistency between nearby light sources is part of the plan.
Can downlights go in a shower or outside?
Only fixtures approved for the specific location and conditions should be used. We review the selected model and applicable installation requirements.
Why do my LED pot lights flicker or buzz when dimmed?
Possible causes include fixture-driver compatibility, the dimmer or the electrical installation. We investigate rather than assuming replacing a switch will resolve every issue.
Can you work with my designer’s lighting plan?
Yes. We review fixture specifications, switching, access and practical installation details with your designer or builder before rough-in.
How much does installation cost?
Pricing depends on fixture selection, quantity, ceiling access, new wiring and controls. Send your plans or room photos for a project-specific quote.
Let’s bring your room into focus.
Electric FX serves Toronto, the GTA and Simcoe County. Tell us about your space, preferred fixture style and how you would like to control the lighting.
Request your lighting quote