Comfortable overall light
Recessed lighting, ceiling fixtures and indirect light establish the room’s general illumination without relying on one overly bright source.
Electric FX · Lighting & controlsLighting Design
Lighting Design
& Installation.
Toronto, the GTA & Simcoe County.
Electric FX installs indoor and outdoor lighting in Toronto, the GTA, and Simcoe County, from pot lights, chandeliers and ceiling fans to landscape lighting, step lights and accent LED strips. We plan placement, wiring and controls for renovations, custom homes and existing spaces.
Licensed Electrical Contractor · 7012216Master Electrician LedLighting & ControlsSupport After Installation
More than brighter roomsLight for the way
Light for the way
you live.
Good lighting helps you prepare dinner, read comfortably, highlight artwork and settle into the evening. It also brings out the materials and architectural details you chose for your home.
Electric FX helps homeowners, designers and builders coordinate fixture placement, light output, colour temperature, dimming and switching. We consider daylight, furniture, ceiling heights and finishes before deciding where the lights should go.
Whether you are updating an existing room or planning a residential renovation or custom home, we build the lighting around your space.
A layered approachFour layers.
Four layers.
One considered result.
Light where you need it
Under-cabinet lighting, vanity lighting and focused fixtures help illuminate counters, mirrors, desks and reading areas.
Details worth noticing
Wall washing, art lighting and shelf lighting draw attention to textures, displays and architectural features.
Fixtures with personality
Pendants, chandeliers and sconces complement your interiors, with mounting locations and proportions coordinated before installation.
Lighting servicesFrom rough-in
From rough-in
to the final glow.
We install new lighting, replace existing fixtures and resolve lighting problems in Toronto, the GTA, and Simcoe County. The scope is tailored to the building, access and finish requirements.
Pot lights & downlights
Layouts, beam angles, trim styles and fixture depth considered alongside joists, insulation, ducts and ceiling details.
LED strips & millwork
Under-cabinet, shelf, cove and architectural LED lighting with coordinated channels, diffusers and accessible drivers.
Pendants, chandeliers & sconces
Fixture installation and replacement, including mounting support, switching and placement around furniture and cabinetry.
Practical everyday light
Countertop, island, vanity, mirror and shower lighting selected for the location and coordinated with the room’s finishes.
Landscape & garden lighting
Path lights, tree uplighting, garden accents, deck lighting and patio fixtures. We coordinate fixture positions, cable routes, transformers and timers to bring out the landscape without unnecessary glare.
Ceiling fans & fan lights
New installations and replacements, with mounting support, ceiling height, blade clearances and compatible fan controls reviewed before work begins. Send the fan model and a photo of the existing location so we can plan the installation.
Step, stair & pathway lights
Discrete lighting for indoor stairs, exterior steps, landings and walking routes. We consider light direction, spacing, access for wiring and suitable fixtures for each location.
Security & motion lights
Floodlights, motion-sensor fixtures and dusk-to-dawn controls for entrances, garages and driveways. We position and aim the lights for useful coverage, with attention to nearby windows and neighbouring properties.
Exterior soffit pot lights
Recessed lighting for soffits, covered porches and exterior architectural details. Fixture ratings, access, beam direction and switching are planned around the building and exposure to weather.
Holiday lighting & roofline power
Plan outdoor receptacles, suitable protection and timers for seasonal displays, or discuss permanent roofline lighting options. We review the proposed system, access and electrical scope. Temporary decorative lights should be used and removed according to their instructions.
Track, picture & display lighting
Adjustable track heads, picture lights and display fixtures for artwork, shelving, retail spaces and home offices. We match aiming and light distribution to the objects and surfaces you want to highlight.
Upgrades & troubleshooting
LED upgrades, dimmer changes, flickering-light diagnosis and lighting repairs. Book an electrical service call for an existing issue.
Plan the details earlyLighting design.
Lighting design.
Planned around your space.
We work with your designer, builder and millworker to resolve the details that are difficult to change after drywall and cabinetry are complete.
- Colour temperature: warm or crisp?Colour temperature is measured in kelvin (K). For example, 2700K creates a warmer appearance than 4000K. We coordinate the choice with your finishes, daylight and the atmosphere you want, keeping adjoining spaces and fixtures in mind.
- Colour rendering: let finishes look their bestColour Rendering Index (CRI) helps compare how light reveals colours. Where manufacturers provide it, TM-30 offers a fuller picture of colour rendition. We consider this information when selecting light for artwork, cabinetry, fabrics and other finishes.
- Brightness: lumens, lux and the roomLumens describe a light source’s output; lux describes the light reaching a surface. Fixture placement, beam spread, ceiling height and room finishes all affect the result. We plan useful light at counters, desks and seating, with dimming for different activities.
- Visual comfort and glareMore light is not always better light. We consider direct views of the light source, reflections on screens and glossy surfaces, and sightlines from seating. Regressed fixtures, suitable optics and careful aiming can help make the space more comfortable.
- Daylight, scenes and useful controlsPlan electric light alongside natural daylight and window treatments. Compatible scenes, schedules and occupancy or daylight sensors can adapt lighting to how the space is used. Tunable-white fixtures can change colour temperature; dim-to-warm products become warmer as they dim. Equipment and control compatibility determine the options.
- Outdoor lighting with considerationPlace and aim landscape, step and security lighting where it is useful. We consider glare, spill toward neighbouring windows and unnecessary upward light, along with fixture suitability for the location. Timers and appropriate controls help limit lighting when it is not needed.
- Compatibility, access and long-term careMatch LED fixtures, drivers and dimming methods before ordering. Plan accessible driver locations, wiring routes, ventilation and mounting details with your builder or millworker. Manufacturer requirements, replacement parts and cleaning access matter as much as the finished appearance.
- A design that fits the budgetPrioritize the spaces and details that matter most, then compare fixture, control and installation options. Early coordination with your designer and builder helps resolve light coves, millwork channels and ceiling layouts before finishes are complete, with practical alternatives where needed.
Simple, useful controlThe right light.
The right light.
At the right moment.
Separate lighting zones let you use task lighting when you need it and soften the room later. Dimmers and scenes make those changes easier to repeat.
Electric FX installs and supports Lutron Caséta, RadioRA 2 and RadioRA 3 lighting controls. We can plan coordinated scenes and schedules that fit your lifestyle, with keypads and app control where appropriate.
We explain how to use the completed system and provide support for adjustments, changes and additions after installation.
Electric FX project workLighting in
Lighting in
real spaces.
Our processPlanned carefully.
Planned carefully.
Finished beautifully.
- 01
Understand the space
Review your rooms, drawings, existing lighting, priorities and preferred fixtures.
- 02
Coordinate the details
Confirm locations, switching, dimming, wiring access and responsibilities with the project team.
- 03
Install and fine-tune
Complete the installation, test operation and review controls with you. Identify any finishing work within the agreed scope.
Choosing your pot lightsGimbal, slim or regressed?
Gimbal, slim or regressed?
Start with the room.
The best choice depends on where the light needs to land, ceiling space and how comfortable the fixture looks from normal viewing positions.
Gimbal pot lights
A tilting or rotating light source lets us direct the beam toward artwork, cabinetry or another feature. Adjustment limits vary by model. Useful for targeted accents and selected sloped-ceiling applications.
Slim / flat pot lights
A shallow fixture can help where ceiling space is limited. Many models use a broad diffuser for general lighting. We still check the driver space, insulation rating and manufacturer’s installation requirements.
Regressed downlights
The light source sits farther back inside the trim. Well-designed optics and shielding can reduce direct glare and make the ceiling feel less bright. Regressed fixtures may be fixed or adjustable.
More than the trim
Output, beam distribution, colour temperature, colour rendering and dimmer compatibility all influence the result. We consider the whole fixture rather than choosing by diameter or wattage alone.
Understanding beam anglesA focused accent.
A focused accent.
Or a broader wash.
Beam angle describes the spread of the light, not how far the fixture tilts. At the same distance, a narrower beam covers a smaller area; a wider beam spreads light across a larger area. Ceiling height, output, room finishes and overlapping beams also matter.
24°
A more concentrated accent for selected objects or details. Placement and aiming matter to avoid a bright spot in the wrong place.
38°–50°
A wider pool of light for features or a coordinated downlight layout. The right spacing depends on the actual product and mounting height.
110°
A broad spread found in some slim downlights. Useful for general coverage, but a wide beam alone does not guarantee even lighting or low glare.
Check the optics
Liteline ORBIT 2 offers 24°, 38° and 50° options; SlimLED Original specifies 110°. These are product examples, not universal angles for every gimbal or slim fixture.
Manufacturer references: Liteline ORBIT 2 beam options and SlimLED Original specifications. We confirm the current specifications of your selected fixture before installation.
One coordinated projectLighting, power
Lighting, power
and control.
Combine lighting with residential electrical renovations, custom home electrical planning and Lutron lighting controls. If your project adds substantial electrical loads, we can also assess service and panel upgrade needs.
See more installations in our electrical project gallery and read customer reviews. For outdoor displays, see ESA’s holiday lighting safety guidance.
Lighting questionsClear answers.
Clear answers.
Better decisions.
Can you help plan lighting or work from my designer’s drawings?
Yes. We can help develop a practical lighting layout or coordinate installation from your designer’s drawings and fixture schedule. Sharing plans early helps us identify wiring, mounting and control details.
Can you add pot lights without a full renovation?
Often, yes. Access above the ceiling, existing wiring, insulation and framing affect the approach. We assess the room and explain where access openings or finish repairs may be necessary before work begins.
Can you install light fixtures I have purchased?
Yes, subject to suitability for the location, mounting requirements and approval for use in Ontario. Send the product specifications and photos before booking so we can review the installation requirements.
Why do my LED lights flicker or buzz when dimmed?
Possible causes include incompatible dimmers or drivers, lamp issues and wiring faults. We assess the equipment and installation to identify the cause rather than assuming every light needs replacement.
Can you install LED strips in cabinetry and shelves?
Yes. The best results come from coordinating channels, diffusion, wiring and driver locations with the millworker before fabrication. We can also assess options for existing cabinetry.
Do all the lights in a room need the same colour temperature?
A coordinated approach usually feels more cohesive, particularly where fixtures illuminate the same surfaces. We can discuss the atmosphere you want and how different lamps and finishes affect the result.
Can you combine lighting upgrades with smart controls?
Yes. We can plan lighting and compatible Lutron controls together, or assess how an existing installation can be upgraded.
Do you work on commercial lighting?
Yes. Contact us about lighting for offices, studios, retail spaces and other commercial interiors. We review operating needs, access and scheduling to define a suitable scope.
Planning a lighting project?Let’s bring your
Let’s bring your
space to light.
Send us photos, your location and any drawings or fixture selections. We will help you plan the next steps.
Serving Toronto, the GTA, and Simcoe County.