Smoke & CO detector installation · Toronto & GTA

Smoke & carbon monoxide alarms.
Protection starts at home.

Installation, replacement and troubleshooting for smoke alarms, carbon monoxide alarms and combination units. Electric FX helps homeowners keep alarm coverage, power and interconnection working together.

Our skilled team of qualified, licensed electricians serves Toronto, the GTA, Simcoe County and Muskoka, from existing homes to renovations and custom builds.

Request an alarm installation quoteCall 437-292-4970

Licensed Electrical Contractor · ECRA/ESA 7012216 · Master Electrician led · Clear written quotes
Installation & replacement

The right alarms. Connected correctly.

Smoke alarms

New installations and replacement of aging smoke alarms, with device selection and positioning suited to the home and applicable requirements.

Carbon monoxide alarms

Standalone and combination CO alarms, with a review of storeys, sleeping areas and the property’s fuel-burning equipment or attached garage.

Hardwired & interconnected systems

Review of existing power and interconnect wiring, compatible replacement devices, battery backup and functional testing.

Ontario homes

Coverage that reflects your home.

Working smoke alarms are required on every storey and outside sleeping areas in Ontario homes. For homes with a fuel-burning appliance, fireplace or attached garage, CO alarms are required near each sleeping area and on every storey, including levels without bedrooms, effective January 1, 2026.

These are general requirements for existing homes. Building age, renovations, new construction and multi-unit layouts can affect the required locations, power supply and interconnection. We review your property’s needs rather than assuming a single alarm or one standard layout is enough.

Electrical work follows applicable Ontario Electrical Safety Code requirements, with alarm selection and placement coordinated with the relevant building and fire requirements and manufacturer instructions.

Official guidance: Ontario home fire safety · Ontario carbon monoxide safety.

Options for your project

Replacement, upgrades and planned installations.

Existing homes

Replace expired or faulty units and investigate recurring maintenance chirps, power issues or incompatible interconnected alarms.

Renovations & custom homes

Plan alarm wiring and locations early with your builder. Coordinate the work with renovations, custom homes and laneway homes.

Features that suit the occupants

Discuss combination smoke/CO units, sealed-battery options, voice alerts and compatible visual or other accessible alerting equipment where needed. We confirm suitability before installation.

Our process

Assess. Install. Test.

We review the existing alarms, model labels, replacement dates, locations and wiring, then explain the recommended scope. After installation, we test the devices and interconnection as applicable, explain the indicators and controls, and leave you with maintenance guidance.

Products must be approved for use in Canada and compatible with the installed system. Hardwired and interconnected requirements must be preserved; a battery-only replacement is not automatically an acceptable substitute.

For broader concerns, see our electrical safety services or book an electrical service call.

If an alarm sounds

An emergency alarm needs an emergency response.

If a smoke or CO alarm sounds an emergency signal, leave the building immediately and call 911 from outside. Stay out until emergency responders say it is safe to return. Do not wait for an electrician or assume a CO alarm is false because you cannot smell anything.

A maintenance chirp is different from an emergency signal, but patterns vary by device. If you cannot confidently identify the signal, treat it as an emergency.

Common questions

Smoke & CO alarms, explained.

Do I need both smoke and carbon monoxide alarms?

They detect different hazards. Smoke alarms warn of smoke from a fire; CO alarms detect carbon monoxide. A combination unit provides both functions where its location and approval meet the requirements. We assess the coverage your home needs.

Where should smoke and CO alarms be installed?

Ontario requires working smoke alarms on every storey and outside sleeping areas. In homes with a fuel-burning appliance, fireplace or attached garage, CO alarms are required adjacent to sleeping areas and, from January 1, 2026, on every storey. New construction and renovations can have additional requirements; we review the applicable design and installation instructions.

Can you replace my existing hardwired alarms?

Yes. We review the supply, wiring, alarm age and interconnection before selecting replacements. Matching the plug or using the same brand alone does not establish compatibility. We use the manufacturer’s approved compatibility information and test the installed arrangement.

Can alarms be interconnected without new wiring?

Some approved models support wireless interconnection. Whether this is suitable depends on your existing system and applicable requirements. We confirm compatibility and the permitted installation method before recommending it.

Why is my alarm chirping?

A periodic chirp can indicate a low battery, end of service life or a fault, depending on the model. Follow the device’s instructions and arrange prompt service if it cannot be resolved. Do not remove or disable an alarm to stop the sound. If it is sounding an emergency alarm, or you are unsure, leave and call 911 from outside.

When should alarms be replaced?

Use the replacement date and instructions for the exact model. Many smoke alarms have a ten-year service life; CO and combination alarm lifespans vary. A new battery does not extend an expired alarm’s service life.

How often should I test my alarms?

Test smoke and CO alarms at least monthly using the test button and the manufacturer’s instructions, and when returning to a cottage. Follow the instructions for cleaning and battery care, and make sure everyone knows the alarm sounds and escape plan.

How much does installation cost?

The quote depends on the number and type of alarms, access, existing wiring and any interconnection work. Send us your location, the number of storeys and photos of safely accessible alarm labels. We provide a clear written scope before work begins.

Device guidance: Alarm replacement intervals · Interconnection compatibility. Always follow your specific model’s instructions.

Plan your alarm installation

Clear advice. Careful installation.

Tell us about your home, existing alarms and project plans. We’ll help define the replacement or installation work and provide a written quote.

Request your quote