How Long Does It Take to Charge an EV?

By Electric FX Inc. · Licensed Electrical Contractor

← Electrical Advice & Planning

Charging time depends on how much energy you need to add and the average power actually reaching the battery. A routine top-up may take a few hours at home. A large recharge on Level 1 can take more than a day. DC fast charging can shorten a stop substantially, but the result varies by vehicle and conditions.

For drivers in Toronto, the GTA, and Simcoe County, the useful question is often: “Will my car be ready when I leave tomorrow?” You do not need to charge from empty every time.

Start with the amount of energy you need

Battery capacity is measured in kilowatt-hours (kWh). Charging power is measured in kilowatts (kW). To estimate the energy needed, multiply usable battery capacity by the percentage you want to add.

For example, bringing a 60 kWh usable battery from 20% to 80% adds approximately 36 kWh. Use usable capacity where available; an advertised total battery size may include energy the driver cannot access.

A worked comparison for home charging

The examples below add 40 kWh to the battery. They assume steady AC input and 90% wall-to-battery efficiency solely for illustration. Actual losses vary, especially with temperature, conditioning and low-power charging.

AC power suppliedCalculated time
1.44 kW Level 1About 31 hours
7.2 kW Level 2About 6 hours 10 minutes
11.5 kW Level 2About 3 hours 52 minutes

AC estimate: hours ≈ battery energy needed ÷ (AC input power × charging efficiency). For the 7.2 kW example: 40 ÷ (7.2 × 0.90) ≈ 6.17 hours. These are calculations, not charging-time guarantees.

If the vehicle’s onboard charger accepts only 7.2 kW, connecting it to an 11.5 kW wall unit will not produce the faster result in the table.

Why fast charging is harder to predict

A DC charging session follows a changing power curve. Battery temperature, state of charge, vehicle limits and station conditions influence the result. Charging commonly slows as the battery becomes fuller, so a published 10–80% time should not be interpreted as a 0–100% time.

For illustration, adding 40 kWh at an average battery charging power of 80 kW takes 30 minutes. That calculation uses the average power over the session, not the highest number printed on the charger.

Allow for winter and shared power

A cold battery may require warming before it can accept a faster charge. Where supported, use the vehicle’s trip planning and battery-preconditioning features as directed by the manufacturer. Some public stations share power, and some home systems temporarily reduce EV charging when other loads are operating.

Size the home charger for a normal day

A 60 km day at an assumed battery consumption of 18 kWh per 100 km uses 10.8 kWh. Under the same 90% efficiency assumption, a 7.2 kW supply replaces that energy in roughly 1 hour 40 minutes. Your winter use or highway driving may be higher, but this illustrates why daily distance matters more than battery size alone.

Plan your EV charging installation

Planning overnight EV charging? Electric FX can assess a Level 2 installation for your home in Toronto, the GTA, or Simcoe County and help establish a realistic charging window.

Explore EV charger installation · Request a consultation

Planning an electrical project?

Tell us about your home, renovation or upgrade. Electric FX serves Toronto, the GTA and Simcoe County, with projects also available in Muskoka.