Landscape Lighting Design Guide: Plan Paths, Trees and Outdoor Living Spaces

By Electric FX Inc. · Licensed Electrical Contractor

← Lighting articles & guides

A successful landscape lighting design helps you enjoy the garden after sunset without turning the entire property into a brightly lit display. Start with the places you use, the views you value and the areas that should remain dark.

For a Toronto courtyard, a GTA backyard or a larger property in Simcoe County, the most useful starting point is a simple plan of the space. The objective is to give each light a clear job and check the result from the positions where people will actually see it.

1. Draw the garden from the viewer’s perspective

Mark doors, windows, paths, steps, seating, trees and significant structures. Add the places where you pause: the kitchen window, dining chair, patio sofa and arrival point from the driveway. These viewpoints often reveal more than a symmetrical arrangement of fixtures on paper.

Walk through the space after dark with the existing lights on. Record which areas are difficult to navigate and which lights shine directly into your eyes. Then look from inside the home. A fixture hidden from the patio can still be conspicuous through a low window.

Write a short design brief. For example: “Make the side path easy to follow, keep the dining terrace comfortable, and bring one mature tree into view from the living room.” This gives the layout a direction before products are selected.

2. Establish a visual hierarchy

Separate the plan into circulation, activities and focal points. Circulation covers the routes between doors, gates and seating areas. Activities include eating, cooking and reading. Focal points might be a specimen tree, textured wall or sculpture.

Choose a small number of features to lead the view. A garden where every shrub and fence panel receives equal emphasis can feel flat. Quieter areas help the important features stand out and preserve the experience of being outside at night.

Do not use an ornamental tree light as the only light for nearby stairs. A decorative effect and clear visibility of a change in level are different design tasks. Review each separately, even when the same area appears on both parts of the plan.

3. Choose the effect before choosing the fixture

Kichler’s landscape guidance describes several ways to reveal form and texture. These are options to test against the actual property, rather than a checklist of effects every garden needs.[1]

Effect Design purpose Question to test on site
Wall washing A softer, broader treatment of a vertical surface. Does the wall support the scene or dominate it?
Grazing Emphasizes relief in stone or other textured finishes. Do the resulting shadows flatter the material?
Silhouetting Reveals an object’s outline against a lit background. Is its shape recognizable from the main viewpoint?
Path and spread lighting Illuminates walking surfaces or nearby planting. Can people follow the route without looking into a lamp?
Hardscape lighting Integrates light into steps, benches or walls. Can the source be concealed and still serviced?

Tree lighting needs particular restraint. Compare the proposed beam with the shape of the trunk and canopy; light that misses the feature adds little to the scene. Where an upward-facing effect would create unwanted spill, discuss a downward-directed alternative or leave the feature unlit.

4. Design paths and steps around movement

Mark turns, changes in level and the approach to doors. Then review the selected fixture’s light distribution. There is no single spacing that works for every path light: mounting height, output, shielding, path width and planting all change the result.

Avoid deciding positions solely by dividing the path into equal sections. A straight open stretch and a narrow bend beside shrubs may need different treatment. Check the route in both directions, particularly where someone leaving a bright interior first enters the garden.

At steps, review whether the edges and landings remain understandable from above and below. Consider the actual finished tread, not just the location of the fixture on an elevation drawing. Arrange a sample where a concealed detail is difficult to judge before construction.

5. Check comfort from seated eye level

Patios deserve a seated review. A light that seems unobtrusive while standing can sit directly in the sightline of someone reclining on an outdoor sofa. Check dining chairs, low lounge seating and views across the table.

DarkSky and the Illuminating Engineering Society recommend purposeful, targeted, low-level, controlled and warmer-coloured lighting. Put that into practice by limiting spill, reducing unnecessary output and switching decorative lighting off when it is no longer useful.[2]

Review adjoining homes as part of the design. Identify bedroom windows, shared fences and views across property lines before final aiming. A warm light can still cause glare if it is aimed at a neighbour.

6. Compare colour and beam shape in the garden

Choose sample fixtures around the materials being illuminated. Compare the appearance of stone, timber and foliage together rather than judging a colour-temperature number in isolation. A warmer white is a sensible starting direction for many evening gardens, but the final selection should reflect the setting and responsible-lighting goals.

Keep nearby fixtures visually coordinated unless a deliberate contrast serves the design. Existing porch lights can make a new garden scheme appear inconsistent, so include them in the review even if they are not being replaced.

Our guide to lighting metrics explains lumens, watts, kelvin and CRI. For the landscape layout, the practical question is where the selected fixture puts useful light and how it looks from your normal viewing positions.

7. Plan scenes around actual routines

Describe the behaviour you want before choosing controls. An arrival setting might serve the entrance and walking route. An entertaining setting could add the terrace and selected accents. A late-evening setting could switch off ornamental features while retaining only lighting still needed.

These are design intentions, not guaranteed functions of every system. Ask which groups can be switched separately and whether dimming is supported by the exact fixtures and controls. A product with app control does not automatically provide every scene you imagine.

An example: a small Toronto backyard

Consider a fictional garden with a side gate, three steps down to a terrace, a dining table and one mature tree. Begin with the route from the gate to the door and the terrace steps. Next, review useful light around the table without putting a bright source in diners’ eyes. Finally, assess whether the tree adds a worthwhile focal point from the house.

Leave the entire perimeter fence off the initial lighting plan. If the composition feels incomplete during an evening review, test a restrained background treatment before adding more fixtures. The goal is a complete view, not maximum coverage.

Review the design after dark and through the seasons

Check the installed scene from the original viewpoints, then adjust aiming and available output settings. Revisit it after planting fills in or furniture moves. Branches and foliage can change what a beam reaches; snow and different surface conditions can change the perceived brightness.

Keep a marked plan showing the intended effects and operating groups. It gives future maintenance and additions a clear reference, so a replacement fixture does not accidentally change the character of the whole garden.

Plan your landscape lighting with Electric FX

Electric FX designs and installs landscape lighting in Toronto, the GTA and Simcoe County, including Kichler and in-lite systems. Send daytime photos, your landscape plan and the views you want to enjoy after dark. Discuss your lighting design or explore our landscape lighting services.

For budgeting, see our separate landscape lighting cost guide.

Ready to organize the work? Read our landscape lighting installation guide.

Sources and further reading

  1. Kichler — Landscape Lighting Techniques
  2. DarkSky and IES — Five Principles for Responsible Outdoor Lighting

Reviewed October 14, 2026. The design workflow and fictional garden example are practical editorial guidance, not a record of a completed Electric FX project or fixed installation requirements.

Planning an electrical project?

Tell us about your home, renovation or upgrade. Electric FX serves Toronto, the GTA and Simcoe County, with projects also available in Muskoka.